Construction site weighing that protects payload and people.
Accurate weight data, overload protection and tipping stability for the vehicles that move material and plant around a site, from light commercials to 50 tonne tippers.
Heavy material, rough ground, no room for a bad load.
Bulk haulage and heavy goods transport keep construction moving, usually with heavyweight materials and heavy plant equipment, usually across rugged ground where safety comes first. VPG Onboard Weighing has led this sector for several decades with systems designed for accuracy, reliability and convenience on almost every vehicle type that works a site.
Tippers, mixers, plant transporters and loaders, weighed by one partner.
Site logistics runs on a long list of vehicle types: tippers, dumpers, flatbed trucks, heavy plant transporters, concrete mixers and loaders of every kind. Whatever they move, whether that is sand, gravel, waste, chemicals or machinery, they take high wear and tear in tough conditions and still have to weigh accurately.
Our patented inclinometer technology handles overload protection and load optimization with multiple alarm options. Our load cell systems add approved legal-for-trade accuracy across several truck types, help prevent tipping, and extend to specialized installations for cement trucks and other construction-specific vehicles.
Dangerous and overloaded vehicles are caught before they leave the loading point, not at the roadside.
Every run leaves at its full legal weight, which lifts efficiency and profitability across the fleet.
Fewer part loaded trips to move the same material means fewer kilometres and less fuel burned.
Weighing systems for construction vehicles
Pick by vehicle weight, by how the load is measured, and by the accuracy the job needs.
Bespoke scales for construction-specific vehicles
Some site vehicles need the sensor built into the machine rather than under the body. These installations are specified case by case with our engineers.
Shear Pin Load Cell
A simple, low maintenance option designed to fit the rear hinge assembly of dump trucks and roll-offs. Durable, reliable and accurate within 1% of GVW.
Ask an expert about shear pin load cellsFront Fork Scale
A bespoke solution for front-end loaders, suitable for in-motion and static weighing. A rugged fork with a weight sensor bolts to the front of the vehicle and records up to 1,500 events in real time, including individual lift weights, total net payload, date, time and pick-up weight.
Ask an expert about front fork scalesConcrete Mixer Scale
A three point mixer scale installation that gives highly accurate measurement on the drum, so one load can serve several sites in a turn and the amount delivered at each one is known.
Ask an expert about mixer scalesConstruction weighing questions answered
The questions site and fleet managers ask most often before specifying a system.
Read the full FAQWhich onboard weighing system suits a construction tipper?
BulkWeigh is the usual choice for bulk tipping work between 17 and 50 tonnes, with accuracy of ±1% GVW or better and TipWatch and AxleWatch included. For a mixed fleet from 7.5 tonnes up, TruckWeigh covers individual axle and gross weight monitoring to better than ±2.5% (90-100% GVW) and is easy to retrofit.
How does TipWatch prevent a vehicle overbalancing on site?
TipWatch monitors ground level and axle weight distribution while the vehicle loads and unloads. If it detects a risk of overbalancing it raises an audio and visual alert, and a customized setup can halt a tipper in motion before the problem develops. It is standard on all BulkWeigh systems.
Can weight data be read without standing at the vehicle?
Yes. VPG Connect sends all data and alerts from BulkWeigh 1155 and TruckWeigh 1155 systems to a smartphone or tablet over WiFi, so the operator can stay at a safe distance during loading and tipping. The same platform feeds location, pick up and drop off times, weights and alerts back to fleet managers.
Can material be sold by weight direct from the vehicle?
LFT 1500 is approved for trade invoicing from the cab, accurate to 20 kg in 15,000 kg, with an in-built electronic data storage device. It suits bulk delivery work as well as waste and recycling transport.
We have fitted BulkWeigh as an OEM option for over 10 years and install more than 350 systems a year. They are part of our standard build, easy to install and very reliable.
Spec sheets for the site
BulkWeigh 1155 product sheet Compact indicator for the dash, DIN slot or trailer chassis BulkWeigh 1300 product sheet Touchscreen indicator with advanced tipping stability controls Manuals, FAQs and promotional material Common questions about onboard weighing, answeredMarkets that work alongside construction
Spec the right system for your site.
Tell us what you run, what you carry and how the ground behaves, and we will match it to the right onboard weighing system.

