VanWeigh®Overload protection for vans and LCVs up to 7.5 tonnes.
See the load on each axle and the total vehicle weight before you drive away. Solid-state sensors, a colour touch screen in the cab, and no recalibration once it's fitted.
Onboard weighing built for light commercial vehicles
VanWeigh is an onboard weighing and overload protection system for vans and light commercial vehicles (LCVs). It fits any twin-axle LCV up to 7.5 tonnes and works with any type of suspension, using VPG Onboard Weighing's patented inclinometer sensors.
It is simple to fit, easy to use and needs no recalibration. That makes accurate load monitoring affordable for small fleets and single vans as well as large operators, and helps you avoid overload penalties in any country you drive in.

Weighing that doesn't depend on spring deflection
Most LCV overload systems work out weight by measuring how far the springs compress. VanWeigh uses a solid-state inclinometer on each axle instead, with air pressure sensors added on vehicles that need them. There are no moving parts, so nothing wears, stretches or drifts out of calibration.
Once fitted, VanWeigh holds an accuracy of ±2.5% or better at 90 to 100% of gross vehicle weight, the range where overloading actually happens. It needs very little maintenance and no recalibration.
Three alert levels on the cab touch screen
Each level shows on screen with an audible alarm, so the driver can move or remove part of the load before setting off.
VanWeigh highlights
A sensor on each axle, one screen in the cab, and data you can send to your fleet systems.
Axle and total load monitoring
A patented solid-state sensor on each axle lets VanWeigh track front axle, rear axle and gross vehicle weight at the same time.
Fit and forget
Lightweight, rugged and low maintenance. Trained technicians install it within four hours, and our agents cover 30 countries.
Simple for drivers
No driver input needed. A large colour touch screen shows clear messages in several languages, backed up by audible alarms.
Any twin-axle LCV, any suspension
Vans, pick-ups and light trucks up to 7.5 tonnes, with any type of suspension. OEM versions are available for vehicle builders.
Telematics output
A dedicated output connects to your tracking system. With our optional cable, your telematics platform logs load data and alerts.
Wi-Fi to phone or tablet
Connect VanWeigh to a smartphone or tablet over Wi-Fi to check axle and gross weights away from the cab.
Avoid overload fines and keep every payload full
Overloaded vans are a common target for roadside checks. A breach can mean fines, licence endorsements or worse for the driver and the business. Stricter EU enforcement means keeping every vehicle within its design limits matters more than ever.
VanWeigh protects you from that risk and helps you carry as much as the vehicle legally allows. Drivers see straight away if the load needs spreading across the axles, and fleet managers can receive the same data through telematics.
Electrical tests passed for E and CE marking. Environmental performance exceeds SAE J1455.
Features and benefits
What the system gives you
What your fleet gets out of it
VanWeigh technical summary
| Vehicles | Twin-axle light commercial vehicles up to 7.5 tonnes GVW |
|---|---|
| Suspension | Any type |
| Sensors | Patented solid-state inclinometer on each axle, plus air pressure sensors where needed |
| Accuracy | ±2.5% or better at 90 to 100% of GVW |
| Monitoring | Front axle, rear axle and gross vehicle weight |
| Alerts | Safe (up to 90%), Warning (90 to 100%), Overload (over 100%), with audible alarms |
| Display | Full colour touch screen, multiple languages |
| Connectivity | Dedicated telematics output (optional cable), Wi-Fi to smartphone or tablet |
| Calibration | No recalibration needed after installation |
| Installation | Within four hours by a trained technician; agents in 30 countries |
| Compliance | Electrical tests passed for E and CE marking; environmental performance exceeds SAE J1455 |
VanWeigh questions answered
The basics of overload protection for vans and LCVs. For more detail, see the full FAQ.
Read the VanWeigh FAQWhat is VanWeigh?
VanWeigh is an onboard weighing and overload protection system for twin-axle vans and light commercial vehicles up to 7.5 tonnes. It measures the load on each axle and the gross vehicle weight, and warns the driver before a limit is exceeded.
Which vehicles can VanWeigh be fitted to?
VanWeigh fits any twin-axle light commercial vehicle up to 7.5 tonnes GVW, with any type of suspension. That includes panel vans, pick-ups, chassis cabs and light trucks. For vehicles above 7.5 tonnes, VPG Onboard Weighing offers TruckWeigh.
How does VanWeigh measure weight without springs?
Most LCV overload systems measure spring deflection. VanWeigh uses a patented solid-state inclinometer sensor on each axle instead, with air pressure sensors added on vehicles that need them. There are no moving parts to wear or stretch.
How accurate is VanWeigh?
VanWeigh is accurate to ±2.5% or better at 90 to 100% of gross vehicle weight, the range where overloading happens. Because the sensors have no moving parts, it does not need recalibrating after installation.
How long does VanWeigh take to install?
A trained technician can install VanWeigh within four hours. VPG Onboard Weighing has agents in 30 countries.
Can VanWeigh send load data to telematics or a phone?
Yes. The VanWeigh indicator has a dedicated telematics output, with an optional cable from VPG Onboard Weighing to connect your tracking system. It also connects over Wi-Fi to a smartphone or tablet.
Product sheet, manual and videos
Everything needed to spec, install, set up and calibrate VanWeigh. The product sheet is also available in other languages:
All promotional materialWhat fleets and vehicle builders say about VanWeigh

The VanWeigh units are worth their weight in gold. There is no fiddling about to add up weight, just load the vehicles and the unit does the rest. Drivers can see straight away if they need to alter their load to spread the weight.
With VanWeigh there is no driver interaction required, which for us means minimal operational issues. Having been trained on the installation, we can install the system within two hours and calibrate within 30 minutes. We have had zero operational issues in three years.
With no moving parts, we find VanWeigh isn't prone to wear and tear and doesn't require frequent calibration. We have installed over 500 VanWeigh systems for a large utility company and have no problems recommending this product.
VanWeigh offers a fit and forget solution. It is easy to install and the unexposed underbody sensors withstand the daily conditions that the vans are subjected to on and off road.
Put VanWeigh on your vans.
Tell us your vehicle makes, models and suspension types. A VanWeigh expert will confirm the right setup and arrange fitting through our network of trained installers.

